To provide customers with high-quality professional power distribution solutions, adhering to the "integrity, professional, fast, let the user satisfaction" service concept

Services

Customized Support Product manual

Advantages of PDU

Date:2020-12-02 06:03:31


Advantages of Qunfang technology company in design:

1. Carry out the normal preparation of modules, fine optimization, and strengthen stability
2. Miniaturization, can be equipped on 52mm profile
3. It supports mixing of various sockets and customization of various numbers
4. Order size does not affect customization
5. Support sheet metal beautification design
6. The plug-in design of all fault points can be replaced within 1 minute by ordinary engineers, and the socket does not power down during the replacement process
It can be upgraded online, 3 series can be upgraded to 4 series, and the process does not need to be powered off, and the socket does not power down
7. The sockets of national standard or IEC standard can realize integrated welding of copper bars, and the interior is clean and generous. With the positioning of tooling, stress-free welding can be realized.
8. There is no left and right design of IEC socket, which is simple to order and convenient to install on site.
9. The failure rate of the intelligent PDU is higher than that of the header, and most manufacturers have designed the plug-in structure. However, their executive board is still in the fixed built-in mode before. In fact, the failure rate of the executive board is not lower than that of the header. Generally, there are the following factors:

On the one hand, the intelligent PDU executive boards on the market are not standard, with different demands. The executive boards are customized on demand, and the uncertain factors are too large. Because the executive board contains MCU, ADC chip, capacitor, resistor, crystal oscillator and other devices. The stability of temporary customization cannot be determined.

Our Qunfang technology company?s header and executive board are plug-in and plug-in, which are standardized standard parts. The execution board and header are tested in batch production in advance. When the customer needs it, they can be combined according to the customer?s requirements, and the stability is guaranteed.

On the other hand, there are few domestic manufacturers with independent R & D capabilities. In the market order competition, suppliers cut corners and the quality is uneven. It is difficult to guarantee the stability of product quality.

Our Qunfang technology company has the following advantages: 

1. Profile: the PDU high-quality profile selected by Qunfang technology has a wall thickness of 2.0 mm, which is far better than most similar products in the market in terms of hand feel and strength, and there will be no collapse or socket drop. The profile surface is treated by electrostatic spraying, and the finished product is beautiful and elegant

2. Copper bar: the diameter of 3mm and 2mm is preferred, and the purity is more than 99.95%. It can be used flexibly according to the current.

Many companies on the market use double splicing copper bars for hot wire and zero line above 32A to save cost,

3. Socket: 1.6mm thick

All PC + ABS are selected

All sockets have no structural screws

The whole system meets the flame retardant grade ul94-v0

The logo of national standard socket 10A / 16A is clear and eye-catching

If you want to know more about PDU, or you have any questions, please call +86-755-88210232, Qunfang technology company will serve you wholeheartedly!